Inspect structural integrity with ease
Fast and precise XRF Analysis
Measure elasticity or strength of concrete
No results found.
Inspect structural integrity and defects in concrete.
Fast alloy identification and material verification on-site.
Locate rebar and detect internal concrete structures reliably.
INTROS covers a wide range of rope diameters, and can be used for rope inspection in mines, cranes, elevators, rope ways, bridges, overhead transmission lines, etc. INTROS consist of a basic unit (BU) and magnetic head (MH) connected with a detachable data transfer cable up to 20 m in length. Magnetic heads are designed to inspect ropes with diameters from 6 mm to 175 mm.
INTROS-AUTO designed for non-destructive inspection of wire ropes with automatic data interpretation. Following criteria are used to discard rope – number of broken wires along lay length and loss of metallic cross section area in percentage. INTROS-AUTO stores detailed data, that can be downloaded and interpreted in regular manner. The instrument consists of magnetic head and control and display unit connected with cable up to 80 m length. Magnetic head has strong permanent magnets, and measuring systems is equipped with Hall Effect sensors and coils.
INTROCON is designed for non-destructive on-line inspection of steel cord conveyor belts, installed on conveyor in mining and cement industries, seaports and steel plants. INTROCON principle of operation is based on eddy current method. The instrument contains scanner and basic unit. The scanner has exciting and measuring coils, powered by basic unit. Width of the scanner is variable and depends on the width of the inspected belt. The scanner is positioned above the belt nearby the drum, where the belt is plane. The distance between scanner and belt is adjustable to maximum 20 mm.
Rope Control Instruments
We use cookies to improve your experience on our site. By continuing to browse, you accept our use of cookies.
Bilgilerinizi bırakın, sizi en kısa sürede arayalım.
